Инструкция victor vc97

инструкция victor vc97
Runner-ups: The Mastech MS8268 is quite excellent on push back, but was a tad less stable on the side-to-side stability test. Extech MN36 The Extech MN36 is a bit different from the rest, yet still comes in at the median price of $40 like many others. Seriously. Yet at the same time, this DMM also has TrueRMS AC wave measurement and a USB PC Link (we’ll cover later in this review.) It should be mentioned that the USB port is behind a plastic panel held closed by 2 screws. Even the hinge that props the DMM up holds itself in place well.


The killer feature for me is the auto-range. Описание и схема инверторов WEGA-145 и WEGA-160 Источники для ручной дуговой сварки инверторного типа WEGA-145 и WEGA-160, предназначены для питания сварочной дуги при проведении следующих сварочных работ. Если проводит в обе стороны — он пробит. В руководстве приведены технические характеристики основных агрегатов и систем автомобиля Hyundai Tucson. Источники питания серии HY3000 являются высокостабильными регулируемыми источниками питания постоянного тока с регулируемым выходным напряжением и регулируемым ограничением по выходному току. Полностью заряженные аккумуляторы будут необходимы для сопротивления и непрерывности испытаний.

Like the Mastech, this DMM is well thought out. It also includes a capacitor/resistor/transistor add-on which was significantly different than the others. Why more DMMs don’t do this, I have no idea… The only major criticisms that can be leveled at this DMM is that the numbers on the display could be a little bigger. The display numbers are not overly large, but are very easy to read. The OFF position is in the middle of the dial. To the left of OFF is the current measurements (with exception to continuity, diode, resistance, and capacitance testing.) To the right of OFF is vAC and vDC as well as Hz/% and C/F temperature measurement.

Похожие записи: