Paradox k10v инструкция


Therefore, it is possible to send information from the control point along with the GPS location or a readout of RFID points to the server. This post will explain how to do a manual reset, or “factory default” on Paradox SP alarm panels, including SP5500, SP6000, and SP7000. Note: Following these steps will return your alarm panel to its factory default state. Next *Click next to login or create your PriceCheck account Login Choose your shipping address: add a new shipping address Shipping address: New shipping address: Input is not a valid name! This means all programming will be erased. Do not reset your panel unless you are familiar with panel programming and confident you will be able to program the panel as necessary. Strength 8” Cable Ties, Black, 1000 Pack ICACSS8KNL — ICC Nylon 18 lb. Alarms should only be sounding when the system is armed, and there has been an activation from one of the detectors being triggered.


Please be aware that in most circumstances a small fee will apply. Вынуть карту из считывающего устройства и вставить в клавиатуру. На экране клавиатуры должно появиться сообщение о том, что на внешней карте памяти обнаружена новая версия прошивки, и будет предложено установить ее. Strength 7.5” Cable Ties, Black, 1000 Pack ICACSL7KNL — ICC Nylon 50 lb. Active Track is a new security device integrating a GPS receiver and a quad band GSM/GPRS mobile phone in a very durable casing. When there is no readout within the set time, the monitoring station is notified about the irregularities.

This is primarily used to arm and disarm the alarm system. Reconnect the AC and battery power to the panel. Most systems offer the facility to program more than one user code.

Похожие записи: