There will be a white or a silver decal located on the frame in one of the following positions: On the right side opposite the power cord. The range modulator was composed of 23 steps in a circular track with height ranging from 0 mm to 138.93 mm; the contribution time of each step was determined based on the angular width. You will also want to look at the vertical, main frame bar that lays parallel to the floor.
Back To Top EllipticalsThe model number and serial number on an elliptical machine can be found in one of three places: The serial number may be on the main bracket on a white or a silver sticker at the rear of the machine. Back To Top SteppersThe most common place to find your model and serial number is on a white or a silver sticker on the bottom of the upright bar that holds the monitor. When the final article is assigned to volumes/issues of the Publication, the Article in Press version will be removed and the final version will appear in the associated published volumes/issues of the Publication. Then, finally, the beam reaches the target volume in the water phantom.
Application of dose kernel calculation using a simplified Monte Carlo method to treatment plan for scanned proton beams — Mizutani — 2016 — Journal of Applied Clinical Medical Physics — Wiley Online Library. There are two common options for beam modification: one is to use uniform and large field irradiation, and the other is to use small field scanning. Note to users:Corrected proofs are Articles in Press that contain the authors’ corrections. The uncertainty levels of the simulation and of the measurement data were determined at a 95% confidence level. The simulation results for the location at which patients are typically positioned were compared to the 3He (helium-3) neutron measurement data. The serial number may be on a white or a silver sticker on the main frame under the left pedal arm.